The New PondMaster Mini Skimmer can be added to almost any new or Pre-existing pond. The Mini-Skimmer works different then other skimmers because it is placed in the pond rather than going through the liner. It works best with the PondMaster Models 7-18 pumps. The pump can be connected to either the right or left side of the skimmer or at the bottom. Dual Pre threaded holes are already there and included are adapters for 1/2" and 3/4" FNPT inlets. Inlets are on each side so you can use the right or the left or both. Can be installed in any new or existing pond Pump does not sit inside skimmer Hanger strap for easy installation inside of pond No cutting of liner UV resistant for longevity Lift out strainer basket for easy service Compact size, making it easy to conceal Skims debris from the surface for less organic material in water Product 

PondMaster Mini Skimmer Part Number 02450 Application In Pond Skimmer No. of Filter Mats 1 Minimum/Max. Flow Rate (GPH) 700 - 1800 GPH Discharge Adapter Size 1/2" and 3/4" MPT Adapters Dimensions (L x W x H) 12-1/2" x 10-1/2" x 11-1/2" Manufacturer's Warranty 1 years (excluding filter pad)

Recommended for use with inline submersible pumps in the 700 to 1800 GPH range such as the Pondmaster PM7, PM9.5, PM12 and PM18 models and the CalPump S-900 or S-1200 pumps. Keep in mind that the larger the pump the more flow you will have coming through the skimmer. Make sure that your pump is sized properly and that the pump intake fitting is threaded 1/2" or 3/4" and can accept a threaded pump inlet to the skimmer. Pump does not sit inside of skimmer. It connects to the bottom of the skimmer or the side of the skimmer. With adapters you can connect the pump to the skimmer with tubing and barbed adapters and place the pump at the bottom of the pond.