MICROBE-LIFT®/OPC OXY POND CLEANER will safely spot-treat all areas of light-to-heavy accumulations of debris on rocks, waterfalls, streams, planters, etc. MICROBE-LIFT®/OPC OXY POND CLEANER IS 100% safe when used as directed. MICROBE-LIFT/ OPC - OXY POND CLEANER Break Down Unsightly Debris! OXY POND CLEANER will safely yet immediately breakdown accumulated debris from rocks, streams and on waterfalls.
* Uses Oxygen Power to break down unsightly debris
* Especially helpful on streams and waterfalls
* Deep cleans planters and rocks
* Oxidizes and Detoxifies
* Helps to prevent pond odors Use Weekly to Eliminate Stressful Pond Draining
Directions for Use:
MICROBE-LIFT®/OPC OXY POND CLEANER is not temperature sensitive but works best in warmer weather. To achieve the best results, manually clean out as much accumulated debris from the pond as possible and shut down waterfalls before cleaning. Do not dilute. To treat areas with debris build up, sprinkle over areas needing treatment. Make direct contact but avoid live plants where possible. To maintain a continued proper ecosystem in your pond, always add MICROBE-LIFT®/PL, or any bacterial/enzymatic treatment, 48 hours after using MICROBE-LIFT®/OPC.
To calculate number of gallons in the pond: Multiply: Length (ft.) x width (ft.) x depth (ft.) x 7.48 = total gals.
Basic application Rates:
Spot Treatment Apply a light application to the area needing to be cleaned. Weekly Maintenance/ No Existing Debris 80 gal. - 200 gal. 1 ï¾½ tbls. (.75oz.) 201 gal. - 500 gal. 3 tbls. (1.5oz.) 501 gal - 1,000 gal. ï¾½ cup (4 oz.) 1,001 gal. - 1,500 gal. ï¾¾ cup (6 oz.) 1,501 gal. - 2,500 gal. 1 cup (8 oz.) Light Accumulations of Debris 80 gal. - 200 gal. 2 tbls. (1oz.) 201 gal. - 500 gal. 4 tbls. (2 oz.) 501 gal. - 1,000 gal. ï¾¾ cup (6 oz.) 1,001 gal. 1,500 gal. 1 cup (8 oz) 1,501 gal. 2,500 gal. 1 ï¾½ cup (12 oz.)
Use MICROBE-LIFT®/AMMONIA TEST STRIPS to test for the presence of ammonia in your pond water. If ammonia levels are above 0.8mg/L, DO NOT apply MICROBE-LIFT®/OPC OXY POND CLEANER until the ammonia level is brought down below 0.8mg/L. If ammonia levels exceed 1.0mg/L, add MICROBE-LIFT®/AMMONIA REMOVER.